鲜花装饰纸生产工艺  

Technology of Decorative Paper with Flowers

作　　者：党育红[1] 李鸿魁[1] 关庆芳[1] 

机构地区：[1]陕西科技大学造纸工程学院,陕西西安710021

出　　处：《纸和造纸》2009年第6期53-55,共3页Paper and Paper Making

摘　　要：分析进口纸样的纤维形态、组成及配比;测定纸样各项物理性能指标;探讨鲜花装饰纸的生产工艺。结果表明:鲜花装饰纸最佳工艺条件为:打浆度为针叶木浆64°SR,麦草浆53°SR,纤维配比70∶30;花瓣的选择以颜色鲜艳、花瓣面积不超过1cm2的风干花瓣较好,花瓣用量8%,浆料上网浓度0.70%;阳离子淀粉用量1.5%,其加入方式为花瓣置于阳离子淀粉中处理后再与纸浆混合,与浆料混合作用时间为10min。鲜花装饰纸抗张指数55.85N·m·g-1,撕裂指数8.36mN·m2·g-1,耐破指数267.8kPa·m2·g-1,耐折度221次。基本达到了进口纸样水平。The imported decorative paper with flowers was analyzed. The influence of the facts such as the ratio of softwood pulp to straw pulp, sheet-maklng conditions, high molecular chemical additives on the properties of the production were studied. The results showed that the fiber composition was softwood pulp 70%, straw pulp 30%, the beating degree of softwood pulp was 64°SR, straw pulp was 53°SR, the proper dosage of flowers was 8.0%,pulp consistence was 0.70%, the dosage of cationic starch was 1.5% and the reaction time was lOmin. The physical properties of the decorative paper with flowers got the same level of the imported ones.

关 键 词：鲜花装饰纸 鲜花 阳离子淀粉 ZETA电位 

分 类 号：TS761[轻工技术与工程—制浆造纸工程]