共单体固相接枝PP对PA6/PP合金增容作用的研究  

RESEARCH ON POLYPROPYLENE SOLID PHASE GRAFT COMPATIBILIZED PA6/PP

作　　者：施孝众[1] 袁英樱[1] 黄柯伟[1] 黄之洋[1] 钱欣[1] 

机构地区：[1]浙江工业大学化学工程与材料学院,杭州310014

出　　处：《工程塑料应用》2009年第6期17-19,共3页Engineering Plastics Application

摘　　要：研究了马来酸酐、苯乙烯共单体固相接枝聚丙烯[PP-g-(MAH-co-St)]增容尼龙6(PA6)/PP合金的两相形态结构、力学性能及结晶性能。结果表明,PP-g-(MAH-co-St)是PA6/PP合金的有效增容剂,少量的PP-g-(MAH-co-St)即可达到良好的增容效果,能够显著提高合金的力学性能。加入增容剂后,PP在基体PA6中的分散更均匀,颗粒尺寸更细小。增容剂使PA6/PP合金的结晶性能发生改变,PP结晶度增加,PA6结晶度下降。The morphology, mechanical properties and crystallization of compatibilized PA6/PP blended by the solid phase graft copolymer PP-g-（MAH-co-St） were studied. The results showed that PP-g-（MAH-co-St） was a kind of effective compatibilizer, it could significantly improve the mechanical properties of the blends even if with a little amount. SEM photographs showed that PP dis- persed uniformly in PA6 matrix, and had smaller particle size after adding PP-g-（MAH-co-St）. The crystallization of PA6/PP was changed as the participation of PP-g-（MAH-co-St）. The crystallinity of PP were increased and the crystallinity of PA6 were decreased.

关 键 词：马来酸酐 苯乙烯共单体固相接枝聚丙烯 相形态 力学性能 结晶性能 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业] TB332[一般工业技术—材料科学与工程]