负载Ni炭气凝胶的制备及结构性能研究  

Preparation and study of structure,property of nickel-dispersed activated carbon aerogels

作　　者：徐晓红[1] 孟庆函[1] 曹兵[1] 

机构地区：[1]北京化工大学材料科学与工程学院,北京100029

出　　处：《功能材料》2009年第6期949-952,共4页Journal of Functional Materials

基　　金：国家自然科学基金资助项目(50502004);北京市科技新星计划资助项目(2007B020)

摘　　要：以间苯二酚、甲醛为原料,添加适量的十二烷基苯磺酸钠,再加入不同浓度的乙酸镍溶液,在85℃水浴中聚合;经溶胶-凝胶、溶剂置换、常压干燥和1000℃氮气气氛下热解,得到负载不同含量金属Ni的炭气凝胶。利用透射电镜(TEM)、扫描电境(SEM)、X射线衍射(XRD)、比表面积及孔径分析(BET)和直流充放电测试等手段,对比讨论了负载不同含量金属Ni对炭气凝胶的结构和性能的影响。结果表明,这种方法可以均匀地将Ni纳米粒子分散于炭气凝胶中;适量的金属Ni可使炭气凝胶的比表面积及充放电性能得到显著提高;如负载Ni含量过高则炭气凝胶石墨化程度增加。Nickel-dispersed carbon aerogels have been prepared using dodecylbenzene sulfonic acid sodium salt and nickel acetate of different concentrations as catalyst based upon a polycondensation of resorcinol with formaldehyde at 85℃ and an ambient pressure drying followed by carbonization at 1000℃. Resulting carbon aerogels （CAs） have been investigated in detail by TEM,SEM, XRD, BET and charge-discharge current test. Discuss the effect of different content of nickel to structure and property of CAs. It was found that nickel particles was dispersed regularly in CAs; the appropriate amount of nickel could increase the specific surface area and specific capacitance evidently, more nickel made CAs tend to graphite.

关 键 词：炭气凝胶 常压干燥 负载金属Ni 电化学性能 

分 类 号：TM53[电气工程—电器]