检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]南京航空航天大学材料科学与技术学院,南京210016
出 处:《硅酸盐通报》2009年第3期416-420,453,共6页Bulletin of the Chinese Ceramic Society
摘 要:通过ZrO2与SnO2复合掺杂制备了低损耗的MnZn铁氧体材料。研究了在贫铁配方的基础上添加SnO2-ZrO2对MnZn铁氧体微观结构、电性能以及磁性能的影响。结果表明,适量的SnO2-ZrO2复合掺杂有利于促进晶粒均匀致密,明显提高了材料的电阻率,降低比损耗因子,在ζ(SnO2:ZrO2)为3:1时材料的电阻率达到最大值29.5Ωm,比损耗因子达到最小值4.8×10-6。复合掺杂还能提高材料的居里温度、饱和磁感应强度和起始磁导率,当ζ(SnO2:ZrO2)为3:1时磁性能都达到最佳。ZrO2 and SnO2 co-doped low power loss MnZn ferrites were prepared by the standard ceramic method. Effects of SnO2 and ZrO2 doping on the microstructure, magnetic and electrical properties of MnZn ferrites with Fe-poor composition were investigated. It is found that a proper amount of co-doping can improve uniformity of crystalline grains. Co-doping can increase the Curie temperature, saturation magnetic induction and initial permeability, which reach their maximums when ζ ( SnO2: ZrO2 ) equals 3: 1. Co-doping can also increase the resistivity and decrease the relative loss factor. When ζ(SnO2:ZrO2 ) equals 3: 1, a maximum resistivity of 29.5 Ωm and a minimum relative loss factor of 4.8 × 10^-6 can be obtained.
关 键 词:MNZN铁氧体 居里温度 起始磁导率 电阻率 比损耗因子
分 类 号:TM277[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.175