检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马长明[1] 张春[2] 李永明[2] 王志华[2]
机构地区:[1]清华大学深圳研究生院,深圳518055 [2]清华大学微电子学研究所,北京100084
出 处:《电路与系统学报》2009年第3期12-16,共5页Journal of Circuits and Systems
基 金:北京市科学技术委员会2005年度科技计划重点项目(D0305003040111);国家自然科学基金资助项目(60475018)
摘 要:本文提出一种与普通CMOS工艺兼容的、适用于UHF频段无源RFID应用的低功耗电源恢复电路和一种新型OOK解调技术。该解调技术具有结构简单、功耗低、易于集成、适应大动态范围等特点。芯片采用0.18μm CMOS工艺进行设计,测试结果表明在电源电路负载为510kΩ时,恢复出的芯片电源电压为1.6V^2.0V;在发射功率为4W EIRP的条件下,可以在3.7m的距离下正常工作。This paper presents a low power rectifier, which is compatible with standard CMOS process, and a novel OOK (On-Off Keying) demodulator technique for passive UHF RFID transponders. This technique has some outstanding merits, such as, low power, easy to be integrated and applicable to the environment, which distance from the reader changes greatly. We simulate the circuits with BSIM3V3.2 model and Cadence Spectra. Those circuits have been fabricated in 0.18ttm standard CMOS process. Measurement results show that at the condition of a 510KΩ resistance at the power output and 4W EIRP(equivalent radiated power), the rectifier can output 1.6V to 2V, which corresponds to a reading distance of 3.7m.
关 键 词:射频识别(RFID) 低功耗CMOS 电源恢复电路 OOK解调 AC/DC
分 类 号:TN432[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200