齿轮齿根应力准确计算模型构建方法  

Method to Accurately Calculate Gear Tooth Stress Model

作　　者：杨小安[1] 张伟社[1] 高勇[1] 王恺[1] 

机构地区：[1]长安大学理学院,西安710064

出　　处：《煤矿机械》2009年第7期24-26,共3页Coal Mine Machinery

基　　金：陕西省自然基金项目(2007611)

摘　　要：应用齿轮范成加工原理和UG三维建模技术,构建了渐开线直齿圆柱齿轮精确齿形的三维几何模型,并将其导入ANSYS软件。以GB3480-83标准中的齿根应力计算方法的计算结果为基准,在载荷作用齿顶(7级以下齿轮)时通过大量有限元试算,总结出了合理的边界条件,建立了精确的有限元计算模型。该建模方法无需渐开线及齿根过渡曲线方程的求解,可用于高精度(6级以上)齿轮或变位齿轮齿根弯曲应力的准确计算。通过实例进行了使用说明。Three -dimensional geometric model was constructed by using generation method and UG three modeling techniques to the involute spur gear tooth accurate, and imported into ANSYS. The standards of GB3480 - 83 of the teeth with the stress calculation method for calculating the results as a benchmark, in the tip load （7 following gear） with a large number of finite element spreadsheet, summed up a reasonable boundary conditions, the establishment of a precise limited element model. The modeling method and without involute dedendum transition curve equations can be used for high - precision （ six over） or gear shift gear tooth root bending stress of a precise calculation. Text through examples of their use are described.

关 键 词：齿根应力 UG建模 有限元分析 精确计算模型 

分 类 号：TH132.413[机械工程—机械制造及自动化]