SDBS对聚苯胺/氧化镝复合材料性能的影响  

Effect of SDBS on performances of PANI/Dy_2O_3 composite materials

作　　者：马利[1] 李建凤[1] 甘孟瑜[1] 严俊[1] 贺玲[1] 

机构地区：[1]重庆大学化学化工学院,重庆400044

出　　处：《功能材料》2009年第7期1087-1090,1093,共5页Journal of Functional Materials

基　　金：国家自然科学基金资助项目(20176066)

摘　　要：采用乳液原位聚合法,合成了十二烷基苯磺酸钠(SDBS)掺杂的聚苯胺(PANI)/氧化镝(Dy2O3)复合材料(PANI/Dy2O3)。通过X射线光电子能谱(XPS)、红外光谱(FTIR)、X射线衍射(XRD)、激光粒度分析、塔菲尔曲线(Tafel)和交流阻抗谱(EIS)等手段,表征了在一定的合成条件下,SDBS与苯胺(An)摩尔比(n(SDBS)/n(An))的改变对PANI/Dy2O3复合物的结构、结晶性、粒度及其防腐性能等的影响。实验结果表明,通过Dy2O3对PANI的复合,聚苯胺在复合涂层中所需用量也大为减少(从25%减少到10%),且聚苯胺涂层的防腐性能提高了一个数量级(腐蚀电位从-0.1684V提高到-0.0153V);而且当n(SD-BS)/n(An)为0.8时,PANI/Dy2O3复合材料的平均粒径和分子规整性较佳,PANI/Dy2O3复合涂层的腐蚀电位最大(-0.0153V),塔菲尔斜率最小(3.918),膜电阻最大(7.5916MΩ),防腐性能最佳。Composite materials of polyaniline （PANI） doped with sodium dodecylbenzene sulfonate （SDBS） and dysprosium oxide （Dy2O3） （PANI/Dy2O3） was synthesized by in-situ emulsion polymerization. The effect of molar ratio of SDBS and aniline（An） on structure, crystallinity, grain size and anti-corrosive property of PANI/ Dy2O3 was characterized and analyzed by X-ray photoelectron speetrometry（XPS）, FTIR, X-ray （powder） diffraction（XRD）, laser granulometer, Tafel curve, and electrochemical impedance spectroscopy （EIS）. The results show that the dosage of PANI in composite coating is greatly decreased from 25% to 10% by compounding PANI with Dy2O3 ,and the anti-corrosive property of PANI containing coating on steel is enhanced by one order of magnitude （the corrosion potential is increased from -0. 1684 to -0. 0153V） ; when the molar ratio of SDBS and An is 0.8, the average size and molecular regularity of PANI/Dy2O3 are better, the corrosion potential of PANI/Dy2O3 containing coating reaches a maximum of -0. 0153V, the Tafel slope of the coating reaches a minimum of 3.918, and the resistance of the coating is maximized to 7. 5916 MΩ, thus anti-corrosive property of the coating is the best.

关 键 词：聚苯胺 氧化镝 原位乳液聚合 防腐性 

分 类 号：O631.1[理学—高分子化学]