合成石英晶体Q值的快速分析方法  

Rapid analysis of Q value of synthesized quartz crystal

作　　者：荆忠胜[1] 秦玉春[1] 展鹏[2] 

机构地区：[1]东北电力大学化学工程学院,吉林省吉林市132012 [2]华东理工大学材料学院,上海200237

出　　处：《吉林大学学报（工学版）》2009年第4期948-952,共5页Journal of Jilin University:Engineering and Technology Edition

基　　金：吉林省科技发展计划项目(20050505)

摘　　要：对合成石英晶体Q值快速分析方法进行了研究。利用红外分光光度计吸收系数α与光强之间的经验公式建立了α~Q的工作曲线;固定红外2785 nm波长测量Z块和Y棒晶体的红外吸收;采用化学光谱分析,测量了合成石英晶体Z块和Y棒中所包含的杂质。对比分析结果表明,晶体中杂质含量多的部位,红外2785 nm波长吸收较大,该部位晶体的Q值低;而晶体所含杂质少的部位,对红外2785 nm波长的吸收也小,其Q值高。由此得到了用红外分光光度计快速测量合成石英晶体Q值的新方法。Rapid analysis of Q value of synthesized quartz was studied. Based on the experiential relationship between absorption factor a of infrared spectrophotometer instrument and the light strength, an α~Q working curve was established. The infrared light absorption of Z piece and Y stick crystal were measured as the wave length is fixed in 2785 nm. The impurities in Z piece and Y stick of synthesized quartz crystal were also measured by chemical spectroscopy analyze. The results show that the higher the impurities the Z and Y contain, the lower the Q value is, and vice versa. Based on this observation, a new rapid method to test the Q value of synthesized quartz crystal by infrared spectrophotometer was proposed.

关 键 词：材料分析与检测技术 石英晶体 红外吸收 快速分析 化学光谱 

分 类 号：O484.41[理学—固体物理] TQ227.1[理学—物理]