纤维加筋土中单根纤维的拉拔试验及临界加筋长度的确定  

Single fiber pull-out test and the determination of critical fiber reinforcement length for fiber reinforced soil

作　　者：唐朝生[1] 施斌[1] 高玮[1] 刘瑾[1] 

机构地区：[1]南京大学地球科学系地球环境计算工程研究所,南京210093

出　　处：《岩土力学》2009年第8期2225-2230,共6页Rock and Soil Mechanics

基　　金：国家杰出青年科学基金资助项目(No.40225006);南京大学研究生科研创新基金资助项目

摘　　要：纤维加筋土物理力学性质主要受纤维与土界面之间作用力大小的控制,了解界面的微观力学行为对研究纤维加筋土的机制及工程应用具有重要意义。首先,利用自行设计的纤维拉拔试验装置,对不同含水率和不同干密度的土样进行了单根纤维的拉拔试验,测试并计算了单根纤维与土接触面之间的剪切强度和残余剪切强度,分析了含水率和干密度大小对它的影响。结果表明,设计的试验装置和试验方法能较好地进行单根纤维的拉拔试验,具有较高的准确性和精度。获得了纤维加筋土中界面剪切强度和残余强度与土样含水率和干密度之间的定量关系;分析拉力-位移曲线表明,加筋土中纤维的拉拔特性取决于筋土界面的力学行为,曲线的形状受含水率和干密度的影响不明显。最后,利用测得的筋土界面强度导出了纤维加筋的临界长度。The interfacial interaction between the fiber and soil matrix is a key parameter in controlling the strength behavior, physico-mechanical properties of fiber reinforced soil （FRS）. Therefore characterization and analysis of the micromechanical behavior such as the interfacial shear strength τf is significant for investigating the mechanism of FRS and particular application to engineering. In order to assess and investigate the τf and interfacial residual shear strength τr of PP-fiber （polypropylene fiber） reinforced soil, the single fiber pull-out tests are carried out on the soil samples with different water contents and soil dry densities by using the tester designed by ourselves. The influence of water content and dry density on the τf and τr is analyzed. This investigation proves that the designed tester can be applied to single fiber pull-out test effectively; and the test results are exact. It is found that the τf and τr of samples are decreased with the increase of water content, while increased with an increase in soil dry density. The behavior of the force-displacement curves in the pull-out test depends ultimately on the intrinsic characteristics of the interface; and the shape is not significantly influenced by the water content and dry density. Finally, the critical fiber length is assessed by the obtained interfacial shear strength of fiber/soil.

关 键 词：纤维加筋土 拉拔试验 界面剪切强度 力学性质 含水率:干密度 临界长度 

分 类 号：TU411[建筑科学—岩土工程]