检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:GAO ZhiWen TAO Ran WANG Yue
机构地区:[1]Department of Electronic Engineering, Beijing Institute of Technology, Beijing 100081, China [2]Beijing Aeronautical Technology Research Center, Beijing 100076, China
出 处:《Science in China(Series F)》2009年第8期1409-1417,共9页中国科学(F辑英文版)
基 金:Supported by the National Natural Science Foundation of China (Grant No. 60232010);the Ministerial Foundation of China (Grant No.A2220060039);the National Natural Science Foundation of China for Distinguished Young Scholars (Grant No. 60625104)
摘 要:Passive radar is one of the current research focuses. The implementation of the Chinese standard digital television terrestrial broadcasting (DTTB) creates a new opportunity for passive radar. DTTB system contains single-carrier and multicarrier application modes. In this paper, ambiguity functions of the D'I-I'B signals in the single-carrier and multicarrier application modes are analyzed. Ambiguity function of the DTTB signal contains one main peak and many side peaks. The relative positions and amplitudes of the side peaks are derived and the reasons for the occurrence of the side peaks are obtained. The side peaks identification (SPI) algorithm is proposed for avoiding the false alarms caused by the side peaks. Experimental results show that the SPI algorithm can indentify all the side peaks without the power loss. This research provides the foundation for designing the DTTB based passive radar.Passive radar is one of the current research focuses. The implementation of the Chinese standard digital television terrestrial broadcasting (DTTB) creates a new opportunity for passive radar. DTTB system contains single-carrier and multicarrier application modes. In this paper, ambiguity functions of the D'I-I'B signals in the single-carrier and multicarrier application modes are analyzed. Ambiguity function of the DTTB signal contains one main peak and many side peaks. The relative positions and amplitudes of the side peaks are derived and the reasons for the occurrence of the side peaks are obtained. The side peaks identification (SPI) algorithm is proposed for avoiding the false alarms caused by the side peaks. Experimental results show that the SPI algorithm can indentify all the side peaks without the power loss. This research provides the foundation for designing the DTTB based passive radar.
关 键 词:passive radar DI-FB ambiguity function side peaks identification
分 类 号:TN949.197[电子电信—信号与信息处理] TN952[电子电信—信息与通信工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222