改性聚苯乙烯滤料在BAF中的应用  

Application of Modified Polystyrene Media in Biological Aerated Filter

作　　者：王芬[1] 季民[1] 牛育辉[1] 毕源[1] 汪泳[2] 

机构地区：[1]天津大学环境科学与工程学院,天津300072 [2]中国市政工程华北设计研究院,天津300074

出　　处：《中国给水排水》2009年第15期76-78,共3页China Water & Wastewater

摘　　要：采用氧化和接枝蛋白分子的方法对聚苯乙烯滤料进行表面改性处理,并将其用于曝气生物滤池(BAF)中以检验其对BAF处理性能的改善效果。结果表明:改性处理后的滤料无论是在挂膜速度上还是在生物量上都明显优于未改性滤料,其表面生物量约为未改性滤料的3倍;当COD容积负荷和氨氮负荷分别小于4、0.4 kg/(m3.d)时,采用改性聚苯乙烯滤料的BAF可有效去除COD和氨氮,去除率分别高达86.1%和57%。Oxidation and grafting protein method was used to modify polystyrene medium surface, and the modified polystyrene media were used in biological aerated filter （BAF） in order to test the performance improvement of BAF. The results show that the biofilm formation velocity and biomass on the modified media are increased evidently, and the biomass is about 3 times more than that on unmodified media. When the COD volumetric load and the ammonia nitrogen load are less than 4 kg/（ m3 · d） and 0.4 kg/（ m^3·d） respectively, the BAF using the modified polystyrene media can remove COD and ammonia nitrogen effectively, with the removal rates of 86.1% and 57%.

关 键 词：曝气生物滤池(BAF) 聚苯乙烯滤料 表面改性 

分 类 号：X703[环境科学与工程—环境工程]