炭纤维增强热塑性工程塑料的研制  

MANUFACTURE OF THE CARBON FIBERS REINFORCED THERMOPLASTIC ENGINEERING-PLASTICS

作　　者：张永明[1] 王占武[1] 曹秀杰 赵敏 

机构地区：[1]吉林炭素集团有限责任公司,吉林132002

出　　处：《炭素技术》1998年第4期13-15,共3页Carbon Techniques

摘　　要：研究炭纤维在尼龙、聚甲醛两种工程塑料中的含量对复合材料抗拉强度、冲击强度及耐磨性的影响，并利用扫描电子显微镜观察复合材料的界面结构。结果表明，在CF／PA1010复合材料中，当炭纤维含量达到30％时，抗拉强度达到127．6MPa，耐磨性显著提高。The effects of carbon fiber content in CF/PA1010 CF/PM on their tensile strength, impact strength and wear-resistance were investigated, The interface structures of the composites were characterized by SEM. The results show that when the content of carbon fibers is 30%, the tensile strength of CF/PA1010 comes up 127. 6MPa, the wear-resistance is improved substantially.

关 键 词：炭纤维 界面结构 热塑性工程塑料 增强塑料 

分 类 号：TQ327.306[化学工程—合成树脂塑料工业]