高炉喷吹煤粉质量分布和组分特性关系的研究  

Study on Quality Distribution and Maceral Properties of Pulverized Coal for Blast Furnace Injection

作　　者：焦红光[1] 刘鹏[1] 陈清如[1,2] 

机构地区：[1]河南理工大学材料科学与工程学院,河南焦作454003 [2]中国矿业大学化工学院,江苏徐州221116

出　　处：《钢铁》2009年第8期20-23,28,共5页Iron and Steel

基　　金：河南省重点科技攻关资助项目(117309);河南理工大学引进人才基金项目(Y2006-1)

摘　　要：为了解磨制高炉喷吹煤粉的质量分布和组分特性间的关系,以洛阳某矿生产的原煤为样品磨矿制粉,采用X射线衍射仪和振动样品磁强计分别考察了不同粒度级煤粉的质量状况(灰分、硫分和比磁化率等指标),进而研究了不同粒度级煤粉的组分特性。发现磨制高炉喷吹煤粉的灰分、硫分和比磁化率均随煤粉颗粒粒径减小而递减;而这种规律是由于煤系矿物质同煤基质之间可磨性和磁性的差异造成的,在此基础上结合煤粉制备系统提出了回粉干式磁选新工艺。To find out the quality distribution and maceral properties of fine coal for blast furnace injection,a sample produced by a colliery in Luoyang was used.Take advantage of X-ray diffractometer and vibrating sample magnetometer,three quality specifications as ash,sulfur and magnetic susceptibility of different size of pulversized fine coal were inspected respectively;the maceral properties of different size ranges of milling fine coal were also studied.The results show that these three quality indexes all progressivly reducing along with the decreasing of pulversized coal particle size.The relationship between these three indexes and size is caused by the difference of grinding ability between minerals and coal,as well as the difference of magnetic;so a new dry magntic beneficating process for coarse coal powder can be implanted in existing fine coal preparation system.

关 键 词：高炉喷吹煤粉 粒度 硫分 灰分 比磁化率 磁选 X射线衍射 

分 类 号：TF526.2[冶金工程—钢铁冶金]