基于ANSYS的斜齿轮接触应力有限元分析  

Finite Element Analysis of Contact Stress for Helical Gear Based on ANSYS

作　　者：李珊珊[1,2] 韩丽俊 梁义维[1] 

机构地区：[1]太原理工大学机械工程学院,山西太原030024 [2]兰州职业技术学院,甘肃兰州730070 [3]文水县职业中学,山西文水032100

出　　处：《机械工程与自动化》2009年第4期23-24,共2页Mechanical Engineering & Automation

基　　金：山西省青年基金资助项目(2006021021)

摘　　要：某重卡变速箱中一对输出齿轮副中的主动轮在啮合过程中出现寿命不足现象,故应用大型有限元分析软件ANSYS对其进行静态啮合力分析,获得了齿轮副的静态接触应力云图;基于ANSYS/LS-DYNA进行有限元动态分析,与静态分析相对比,应力水平增加显著。综合静态和动态接触分析发现啮入时主动轮齿端齿根处弯曲强度最弱,易出现折断。Pinion life of the helical gear pair in the transmission of a heavy-duty truck is insufficient. In this paper, gear＇s static emulation was carried out by use of ANSYS software, and the distributing graph of static contact stress was obtained. The dynamic contact stress was analyzed based on ANSYS/LS--DYNA. The simulation results show that the dynamic stress is larger than the static stress. Integrated static and dynamic analysis, the lowest bending strength is located at the root of the driving gear＇s meshing tooth, which may be broken at that moment.

关 键 词：斜齿轮 静态接触 动态接触 应力云图 ANSYS 

分 类 号：U463.212.42[机械工程—车辆工程]