A low power cyclic ADC design for a wireless monitoring system for orthopedic implants  

作　　者：陈怡 李福乐 陈虹 张春 王志华 

机构地区：[1]Tsinghua National Laboratory for Information Science and Technology,Institute of Microelectronics,Tsinghua University

出　　处：《Journal of Semiconductors》2009年第8期147-152,共6页半导体学报（英文版）

基　　金：supported by the National Natural Science Foundation of China(No.60475018)

摘　　要：This paper presents a low power cyclic analog-to-digital convertor （ADC） design for a wireless monitoring system for orthopedic implants. A two-stage cyclic structure including a single to differential converter, two multiplying DAC functional blocks （MDACs） and some comparators is adopted, which brings moderate speed and moderate resolution with low power consumption. The MDAC is implemented with the common switched capacitor method. The 1.5-bit stage greatly simplifies the design of the comparator. The operational amplifier is carefully op- timized both in schematic and layout for low power and offset. The prototype chip has been fabricated in a United Microelectronics Corporation （UMC） 0.18-μm 1P6M CMOS process. The core of the ADC occupies only 0.12 mm2. With a 304.7-Hz input and 4-kHz sampling rate, the measured peak SNDR and SFDR are 47.1 dB and 57.8 dBc respectively and its DNL and INL are 0.27 LSB and 0.3 LSB, respectively. The power consumption of the ADC is only 12.5 μW in normal working mode and less than 150 nW in sleep mode.This paper presents a low power cyclic analog-to-digital convertor （ADC） design for a wireless monitoring system for orthopedic implants. A two-stage cyclic structure including a single to differential converter, two multiplying DAC functional blocks （MDACs） and some comparators is adopted, which brings moderate speed and moderate resolution with low power consumption. The MDAC is implemented with the common switched capacitor method. The 1.5-bit stage greatly simplifies the design of the comparator. The operational amplifier is carefully op- timized both in schematic and layout for low power and offset. The prototype chip has been fabricated in a United Microelectronics Corporation （UMC） 0.18-μm 1P6M CMOS process. The core of the ADC occupies only 0.12 mm2. With a 304.7-Hz input and 4-kHz sampling rate, the measured peak SNDR and SFDR are 47.1 dB and 57.8 dBc respectively and its DNL and INL are 0.27 LSB and 0.3 LSB, respectively. The power consumption of the ADC is only 12.5 μW in normal working mode and less than 150 nW in sleep mode.

关 键 词：monitoring system low power consumption small size analog to digital convertor single to differential convertor 

分 类 号：TP277[自动化与计算机技术—检测技术与自动化装置] TN792[自动化与计算机技术—控制科学与工程]