基于负弛度法的接触网建模与仿真  

Modeling and simulation of catenary based on negative sag method

作　　者：周宁[1] 李瑞平[1] 张卫华[1] 

机构地区：[1]西南交通大学牵引动力国家重点实验室,四川成都610031

出　　处：《交通运输工程学报》2009年第4期28-32,共5页Journal of Traffic and Transportation Engineering

基　　金：国家自然科学杰出青年基金项目(50525518);高等学校科技创新工程重大项目培育资金项目(705044);国家973计划项目(2007CB714700)

摘　　要：基于整体求解的思想,通过接触网在张力和自重作用下的垂向位移,对接触网模型进行重构,并给接触线预留一定的负弛度,以保证经过几次负弛度计算后,接触线到达初始平衡位置时保持水平,由此得到满足初始平衡条件的吊弦长度,确定了接触网在初始平衡位置的几何参数和应力分布,同时将负弛度法和传统方法进行对比研究。对比结果表明:用负弛度法得到的吊弦长度比传统方法略长,吊弦长度最大相对偏差为0.75%;用负弛度法计算的接触网单元应力随单元几何位置的不同而变化,而传统方法得到的单元应力是恒定的,单元应力最大相对偏差为0.55%。可见,两种方法得到的吊弦长度和应力分布有很好的一致性,负弛度法更有利于后续的弓网系统动力学计算,而且对于多跨的复杂接触网模型,负弛度法也同样有效。The model configuration of simple stitched catenary was studied by negative sag method.The initial calculation under the action of tension and gravity was performed to obtain the vertical displacement of the catenary,and the initial model was restructured.Based on the obtained vertical displacement,the negative sag was reserved in advance to ensure the horizon of contact wire under the initial equilibrium state after a series of the calculations of negative sags.Thus,the dropper length,being satisfied with the initial equilibrium equation, was obtained. Furthermore, the model configuration of the catenary was determined, such as the geometry property and stress distribution. Negative sag method was compared with conventional method. It is pointed that the obtained dropper length by negative sag method is slightly longer than that by conventional method, and the maximum relative deviation of the dropper length is 0.75%. For negative sag method, there is small change of the element stress with the various locations of the element. However, for conventional method, the element stress is constant, and the maximum relative deviation of the element stress is 0.55%. The results show excellent agreement with the comparison data. Moreover, it is indicated that with negative sag method, it is easier to implement the subsequent analysis of pantograph-catenary system, and the method is also effective for complicated catenary including multiple spans. 4 tabs, 9 figs, 10 refs.

关 键 词：接触网 初始平衡 负弛度法 吊弦长度 应力 

分 类 号：U225.1[交通运输工程—道路与铁道工程]