喷射成形过程雾化金属颗粒行为的数值模拟  

Numerical Simulation for Behavior of Atomized Metal Granules in Spray Forming Process

作　　者：袁锋[1] 樊俊飞[1] 任三兵[1] 乐海荣[1] 赵顺利[1] 

机构地区：[1]宝山钢铁股份有限公司研究院,上海201900

出　　处：《宝钢技术》2009年第4期2-5,12,共5页Baosteel Technology

基　　金：中国博士后科学基金项目(20080430668)资助

摘　　要：采用CFD软件对喷射成形工艺过程雾化室内金属颗粒的行为进行了模拟,研究了不同雾化压力下、不同粒径的金属颗粒运动轨迹及温度变化情况。模拟结果表明,随着雾化压力的增大,金属颗粒的运动速度明显增加,金属颗粒到达沉积器上的温降更加显著,且颗粒运动轨迹的锥形区域扩散角减小;在相同的雾化压力下,粒径较大的金属颗粒在雾化室内的飞行速度和温降速率明显小于粒径较小的颗粒。Numerical simulation was performed to study the behavior of atomized metal granules in spray forming by using the CFD software. And the movement and temperature of metal granules under different atomizing pressure and with different granule diameters were investigated. The results indicated that with the increase of atomizing pressure, the flight velocity of metal granules increased and the temperature of metal granules decreased obviously when failing onto the substrate, and a cone-shaped angle formed by diffusion of metal granules also reduced. Compared with small-diameter metal granules, the flight velocity and temperature drop rate of metal granules with larger diameters decreased more slowly under the same atomizing pressure.

关 键 词：喷射成形 雾化压力 数值模拟 

分 类 号：TF124.39[冶金工程—粉末冶金]