无针缝服装热压粘合对面料热缩率的影响  

Study on the Properties of Heat Shrinkage Rate of the Fabrics on the Dlhesive Bonding Techniques of No-Stitched Seams Apparels

作　　者：唐洁芳[1,2] 寿弘毅 邹奉元[1] 

机构地区：[1]浙江理工大学服装学院,杭州310018 [2]浙江省新型纺织品研发重点实验室,杭州310009 [3]浙江纺织服装科技有限公司,杭州310009

出　　处：《浙江理工大学学报（自然科学版）》2009年第5期691-694,共4页Journal of Zhejiang Sci-Tech University(Natural Sciences)

基　　金：浙江省科技厅项目(2007C24023)

摘　　要：以三种无针缝粘合防水透湿面料为研究对象,在一定温度条件下,分别测试分析了面料未与热熔胶粘合、与热熔胶粘合和经过预热后再粘合三种状态下的经、纬向热缩率,以及不同冷却时间下热缩率的变化规律。结果显示:面料性能和粘合冷却后的放置时间会影响面料的热缩率,预热后的面料与热熔胶粘合的热缩率小于未预热的面料。Three kinds of water proof and breathable fabrics usually used for outdoor sports clothes are chosen to be tested. The warp and weft heat shrinkage rate of unbonding, bonding and pre-ironing bonding fabrics under the same temperature and different times are discussed. The results show that the fabrics itself performance, the time after heat-press cooling will influence the shrinkage rate of fabrics. The warp and weft heat shrinkage rate of pre-ironing bonding fabrics are smaller than the warp and weft heat shrinkage rate of unbonding, bonding fabrics.

关 键 词：防水透湿面料 热压粘合 无针缝服装 热缩率 

分 类 号：TS941.4[轻工技术与工程—服装设计与工程]