基于ARM7TDMI的μcLinux内核移植的Proteus仿真  

Proteus Simulation Based on the ARM7TDMI μcLinux Core Transplantation

作　　者：唐记弘[1] 张根宝[1] 

机构地区：[1]陕西科技大学电气与信息工程学院,西安710021

出　　处：《化工自动化及仪表》2009年第2期68-71,共4页Control and Instruments in Chemical Industry

摘　　要：将μcLinux内核移植到ARM7TDMI嵌入式处理器上,不仅可以合理地对软硬件资源进行调度,而且为用户提供方便的应用接口。在Proteus平台下设计了基于ARM7TDMI嵌入式处理器的硬件电路,成功地仿真了μcLinux的芯片级移植。利用Proteus在嵌入式系统开发初期就对硬件电路设计和内核移植部分进行尽可能的仿真,不仅节约了成本,还大大缩短了研发周期。To transplant the μcLinux kernel to ARMTTDMI embedded processor not only can schedule hardware and software resources reasonably, but also provide a convenient application interface for user. At Proteus platform, the hardware circuit based on ARM7TDMI embedded processor was designed, and the chip-level transplantation of μcLinux was simulated successfully. Making simulation as much as possible by using Proteus in the early development of embedded systems hardware circuit design and the kernel transplantation, not only cost savings,hut also shortened the development cycle greatly.

关 键 词：PROTEUS ΜCLINUX ARM7TDMI 移植 仿真 

分 类 号：TP399[自动化与计算机技术—计算机应用技术]