基于汽车滚装码头的装卸工艺流程研究  

Research on Load and Unload Techniques and Flows Based on Automobile Ro/Ro Wharf

作　　者：谢君[1] 肖汉斌[1] 

机构地区：[1]武汉理工大学物流工程学院,武汉430063

出　　处：《武汉理工大学学报（交通科学与工程版）》2009年第4期787-790,共4页Journal of Wuhan University of Technology（Transportation Science & Engineering）

基　　金：国家科技支撑计划项目资助(批准号:2006BAH02A17)

摘　　要：归纳了现代汽车滚装物流的特点.以信息技术为基础,研究并设计了完整的基于现代汽车滚装码头的装卸作业流程,围绕着物流信息交换平台和生产管理系统设计了具体的装船作业流程和卸船作业流程.从车辆操作、信号员指挥以及绑扎三方面提出了安全实施汽车滚装码头装卸作业的工艺要点.整套装卸工艺流程在实际应用中取得了很好的经济与社会效益.The article concludes the characteristic of modern automobile Ro/Ro logistics. Depending on information technology, an integrated load and unload flow based on modern automobile Ro/Ro wharf is researched and designed. At the same time, idiographic load flow and unload flow are designed surrounding by logistics information exchange system and manufacture management system. At last , a secure load and unload technics point of automobile Ro/Ro wharf is brought forward from three aspects, such as operation method of automobile, signaler＇s command, colligation and dismantling colligation. The whole series of load and unload techniques and flows have received approving economic and social benefit in practice.

关 键 词：滚装物流 装卸流程 装卸工艺 

分 类 号：U695.293[交通运输工程—港口、海岸及近海工程]