检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张兴华[1] 李明[1,2] 王六龄[1] 魏生贤[1] 徐永锋[1] 项明[1] 王云峰[1]
机构地区:[1]云南师范大学物理与电子信息学院,昆明650092 [2]云南师范大学太阳能研究所,昆明650092
出 处:《西南大学学报(自然科学版)》2009年第9期87-92,共6页Journal of Southwest University(Natural Science Edition)
基 金:国家高技术研究发展(863)计划(2006AA05Z410);国家973计划前期研究专项(2007CB216405);云南省自然科学基金重点资助项目(2007C0016Z2005E0031M);教育部出国留学回国人员基金
摘 要:为提高太阳电池电效率同时获取可利用的热能,设计制作了槽式聚光太阳能热电联供系统并进行系统测试实验.结果表明:聚光后太阳电池阵列系统热效率随温度升高而线性下降;电池阵列峰值功率点随温度升高左移,电池特性参数FF,Pm,eη和温度影响系数由聚光前的0.735,117.4 W/m2,12.3%和-0.2 W/(m2.℃)分别下降到0.39,550 W/m2,6.9%和-5.1 W/(m2.℃).研究工作对提高槽式聚光系统效率和大规模利用聚光光伏发电提供依据,为后续工作提供参考价值.Abstract: In order to improve the electric efficiency of solar cell ar trough concentrating combined solar Photovoltaic/Thermal system was conducted. The results showed that in concentrating the light, rays and obtain a was designed an the thermal effic vailable heat energy, a d tile performance test iency of the system de- creased linearly with increasing temperature of the cell arrays. At the same time, the maximum output power point of the solar cell arrays moved left and the characteristic parameters of FF, Pm,ηe and temperature coefficient of the cell arrays dropped from 0. 735, 117.4 W/m^2 , 12.3%and -0.2 W/(m2 · ℃) before light concentration to 0. 39, 550 W/m^2 , 6.9% and -5.1 W/(m^2 · ℃), respectively, after light concentration.
关 键 词:槽式聚光 热电联供系统 I-V特性曲线 最大输出功率
分 类 号:TK519[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.48