再结晶退火对冷变形00Cr22Ni5Mo3N双相不锈钢显微组织的影响  

Effect of Recrystallization Annealing Temperature on Microstructure of Cold Deformation Duplex Stainless Steel 00Cr22Ni5Mo3N

作　　者：赵科巍[1] 马勤[1,2] 张红霞[1] 王佳[1] 

机构地区：[1]兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,甘肃兰州730050 [2]兰州理工大学有色金属合金省部共建教育部重点实验室,甘肃兰州730050

出　　处：《热加工工艺》2009年第18期107-109,共3页Hot Working Technology

基　　金：兰州理工大学特色研究方向梯队资助项目

摘　　要：对一定冷变形00Cr22Ni5Mo3N双相不锈钢再结晶退火后的显微组织进行了研究。结果表明:退火温度从1000℃开始依次增加50℃至1200℃,通过XRD的检测,确定了试样组织由α、γ两相组成,在再结晶退火温度下没有新相产生;经退火处理后得到大小均匀的等轴晶;在较高退火温度下的铁素体的体积分数明显比在较低退火温度下的铁素体的体积分数要高;较低退火温度比较高退火温度的晶粒细化的效果要好,在较高退火温度下导致晶粒的长大;不同的再结晶退火温度与试样的显微硬度表现出复杂关系。The microstructure of cold deformation 00Cr22Ni5Mo3N duplex stainless steel after recrystallization annealing was studied. The recrystallization annealing temperature was in the range of 1000 ℃ to 1200℃. The XRD detection results show that the microstructure of sample consists of α phase and γ phase, but has not any new phases generating at recrystallization annealing temperature. After annealing treatment, the size of grains is uniform and equiaxed. At higher annealing temperature, ferrite volume fraction is higher than ferrite volume fraction at lower annealing temperatures. The lower annealing temperature is better than relatively higher annealing temperature of the grain refinement effect, the higher annealing temperatures lead to grain growth. The different recrystallization annealing temperature and the micro-hardness of sample show the complex relationship.

关 键 词：双相不锈钢 再结晶退火 显微组织 显微硬度 

分 类 号：TG156.21[金属学及工艺—热处理]