立式加工中心圆孔铣削工艺研究  

Study on milling process of cylindrical hole in vertical milling center

作　　者：王神送[1] 杜茂华[1] 冯磊[2] 

机构地区：[1]昆明理工大学,昆明650093 [2]贵州省电子信息技师学院,都匀558000

出　　处：《现代制造工程》2009年第9期42-44,共3页Modern Manufacturing Engineering

摘　　要：在立式加工中心上利用铣刀直接铣削圆孔,如二维铣削圆孔、螺旋式铣削圆孔和高速铣削圆孔等。采用FUNAC0 i-MA系统的MVC400机床进行试验,证明直接铣削圆孔比传统的钻、铰和镗工艺能获得更好的加工效益。There are several methods make hole in MVC, for example ： drilling.reaming.boring or directly use milling cutters to make holes, as milling holes, are used, such as milling in 2D.milling holes like spire.high-speed milling etc Has taking some experience in the manufacture and now take some comparison of these measures and analyze the result in experiment which is used by MVC400 of FUNAC0i-MA system.

关 键 词：圆孔 FUNACOi-MA系统 立式加工中心 加工工艺 

分 类 号：TH16[机械工程—机械制造及自动化]