BST红外探测器阵列像元信号检测电路设计(英文)  

Design for Pixel Signal Detection Circuits of BST Infrared Detector Arrays

作　　者：范茂彦[1,2] 姜胜林[1] 

机构地区：[1]华中科技大学电子科学与技术系,武汉430074 [2]玉溪师范学院,云南玉溪653100

出　　处：《微纳电子技术》2009年第9期566-574,共9页Micronanoelectronic Technology

基　　金：Supported by the National High Technology Research and Development Program of China(2007AA032120);the National Natural Science Foundation of China(60777043)

摘　　要：针对铁电材料BST的电容在直流偏场下电性能随温度变化,设计了一种用来检测微小差分电容的电路。采用性能、形状较为一致的BST铁电陶瓷单元电容器配对结构,以电脉冲的方式读取不同温度下材料的充放电电荷数,从而探测辐射到铁电材料上的红外信息。实验结果与理论分析较为吻合,中心频率10Hz、带宽2Hz、放大倍数9000倍。这种BST红外探测器阵列像元信号检测电路具有抗寄生电容干扰强、灵敏度高、容易实现、成本低等优点。改进该探测电路,有望开发出结构简单、性能优良的新一代红外探测器。Aiming at the changes in the electrical properties of BSTs with the temperature under DC bias field, a circuit to detect the micro-differential capacitance was designed. The IR radiation detection property was researched by using the BST ceramic double-capacitors with similar characteristic and structure. The charge and discharge number at different temperatures was read out by the electric pulse, and thus the information of infrared radiated into the ferroelectric material could be detected. The experimental results of 10 Hz centre frequency, 2 Hz bandwidth and 9 000 amplification agree with the theoretical computation basically. It shows that the pixel signal circuit of BST infrared detector arrays is free of stray immane capacity, high sensitivity and low-cost and easy for realization. With the improvement of the circuit, the new generation IR detection device with the simple structure and excellent function is anticipant to be exploited.

关 键 词：铁电材料 介电特性 电脉冲 文氏电桥 红外探测器 

分 类 号：TN215[电子电信—物理电子学]