铜板带冷轧乳化液润滑效果研究  

Study on Emulsion for Cold Copper Rolling and Its Lubricating Performances

作　　者：剌瑞[1] 孙建林[1] 成晓举[1] 梁金明[1] 张霆[1] 

机构地区：[1]北京科技大学材料科学与工程学院,北京100083

出　　处：《金属世界》2009年第C00期50-52,共3页Metal World

基　　金：国家SRTP科技创新基金项目.

摘　　要：在单因素筛选实验基础上,对硫系油性润滑添加剂(SCO)和磷系极压润滑添加剂(T306)复合使用的配伍效应进行了深入地研究。实验表明,当SCO含量为2%和T306含量为0.6%复合使用时,两者的配伍性能最差,而SCO含量为2%和T306含量为4%复合使用时,两者的配伍性能最好,轧制润滑实验表明,采用优化的乳化液轧制后,铜板带表面质量明显提高。Based on the screening test of Single factor, an in-depth study of the compatibility effect of the sulfide castor oil （SCO） and phosphorus-containing extreme pressure lubrication additives （T306） has been conducted. According to the experiment, when the content of SCO is 2% and T306 is 0.6% at the same time, the compatibility performance of the two additives is poorest. While when the content of SCO is 2% and T306 is 4%, their compatibility performance is best. The surface quality of the copper sheet is largely improved after using the emulsion.

关 键 词：乳化液 配伍性能 润滑效果 极压润滑剂 

分 类 号：TG335.12[金属学及工艺—金属压力加工]