基于有限元法的正交各向异性复合材料结构材料参数识别  

Material parameter identification for orthotropic composite structure by the finite element method

作　　者：李双蓓[1] 周小军[2] 黄立新[1] 郭相武[1] 

机构地区：[1]广西大学土木建筑工程学院,南宁530004 [2]广州市城市规划勘测设计研究院,广州510060

出　　处：《复合材料学报》2009年第4期197-202,共6页Acta Materiae Compositae Sinica

基　　金：广西科学基金项目(桂科自0728005);广西教育厅科研项目(桂教科研[2006]26号)

摘　　要：以大型商用有限元软件ABAQUS为计算平台,提出了正交各向异性复合材料结构材料参数的识别方法。将材料参数识别的问题转化为极小化目标函数的问题,其中目标函数定义为测量位移与有限元计算的相应位移之差的平方和。采用Levenberg-Marquardt方法极小化目标函数,其中灵敏度的计算基于复合材料的有限元离散结构的求解方程对识别的材料参数求导。数值算例表明本文中提出的方法是有效的。在识别参数过程中,参数的初值以及搜索范围的确定对于识别结果有着重要影响。因此必须充分利用材料参数的先验信息。ABAQUS是高效可靠的商用有限元软件,提出的参数识别方法基于这类商用软件,因而该方法有很强的实用性。Based on the computing platform of the finite element method commercial software ABAQUS, a parameter identification method was developed for orthotropic composite structures. The material parameter identification problem was formulated as the problem of minimizing the objective function defined as a square sum of differences between the measured and calculated data on displacements. Levenberg-Marquardt method, in which the sensitivity analysis was based on the differentiation of the discretized algebraic finite element matrix equations with respect to material parameter, was used to solve the minimization problem. Numerical example shows that the proposed method for parameter identification is feasible and effective. The initial values and upper and lower bounds of parameters identified play an important role in the parameter identification process. Therefore, a priori information of parameters should be used as much as possible. ABAQUS is effective and reliable commercial software for the finite element method, and hence the proposed method based on such a kind of software has strong practicability.

关 键 词：正交各向异性复合材料 有限元法 参数识别 灵敏度分析 

分 类 号：TB330.1[一般工业技术—材料科学与工程]