新型环保铝镁硼复合磷酸盐铸造无机树脂粘结剂热硬砂研究  

Research on New Environmental Friendly Heat Cured Sand of Al-Mg-B Compound Phosphate Inorganic Binder

作　　者：夏露[1] 黄晋[1] 张友寿[1] 李四年[1] 

机构地区：[1]湖北工业大学机械工程学院,湖北武汉430068

出　　处：《热加工工艺》2009年第19期39-42,共4页Hot Working Technology

基　　金：湖北省教育厅资助项目(B200514004);湖北省科技厅资助项目(2005ABA056)

摘　　要：研究了铝镁硼复合磷酸盐铸造无机树脂粘结剂含固量与密度之间的关系,提出通过计算粘结剂的含固量控制合成时的加水量可以简便地获得预期的密度。采用对所研制的粘结剂进行超声波振荡及混砂时加入有机高聚物YPPJ对铝镁硼复合磷酸盐铸造粘结剂热硬砂进行改性。结果表明:超声波振荡可以在一定程度上提高铝镁硼复合磷酸盐铸造粘结剂热硬砂的干强度和抗吸湿性,混砂的同时加入有机高聚物YPPJ,则能使干强度提高2.5倍,抗吸湿性也大大提高。The relation between solid-containing content and density of Al-Mg-B compound phosphate inorganic binder was studied. It was put forward that the expected density can be obtained easily by calculating solid-containing content to control water addition. The heat cured sand of Al-Mg-B compound phosphate inorganic binder was modified by ultrasonic oscillation to binder and adding organic polymer YPPJ while mixing of sand. The results show that ultrasonic oscillation can improve dry strength and humidity resistance of heat cured sand in some degree, and the dry strength can improve to 2.5 times, the humidity resistance can also improve greatly by using ultrasonic oscillation and adding organic polymer YPPJ while mixing of sand.

关 键 词：铝镁硼复合磷酸盐 超声波振荡 有机高聚物 干强度 抗吸湿性 

分 类 号：TG221[金属学及工艺—铸造]