导光板型腔的抛光工艺  

Polishing Process of Light Guide Plate Cavity

作　　者：郭新玲[1] 

机构地区：[1]陕西工业职业技术学院材料工程系,陕西咸阳712000

出　　处：《模具制造》2009年第9期88-91,共4页Die & Mould Manufacture

摘　　要：针对导光板模具型腔抛光加工过程中存在时间长、效果差等问题,提出了新的抛光工艺,并进行了试验分析和验证。结果表明,采用先细磨,再依次采用麻轮+紫蜡、布轮+青蜡、砂纸打磨、布轮抛光的新工艺,抛光时间短,效率高,抛光效果好。According to longer time and poor effect which exist in the polishing process of the light guide plate mold cavity, a new polishing process is proposed and carried out a test analysis and verification, the result shows that the new process, the first fine grinding, then followed by the use of Ma-round＋purple wax, cloth round＋Green wax, sandpaper grinding, and cloth round polishing, result in short polishing time, high efficiency and good polishing effect.

关 键 词：导光板 抛光 镜面加工 

分 类 号：TN141.9[电子电信—物理电子学]