CW61200卧式车床的改进  

Improvement for the horizontal lathe CW61200

作　　者：韦继翀[1] 王宏[1] 张永生[2] 王国义[1] 

机构地区：[1]兰州理工大学机械工程训练中心,甘肃兰州730050 [2]甘肃蓝科石化高新装备股份有限公司,甘肃兰州730050

出　　处：《机械》2009年第9期64-65,共2页Machinery

摘　　要：为加工一批大口径钢管的端面,结合实际情况,对CW61200卧式车床进行改造。改造的主要内容为:为原车床的主轴箱增加轴向进给系统和径向进给系统。通过差动控制,可使安装在花盘上的刀具能沿径向作进给运动。改造后扩大了设备的加工范围,解决了生产实际问题。In order to machining end-surface of a passel of steel-pipe and consider the reality of our center, refit the Horizontal Lathe CW61200. In general, the refit includes two parts, to append axial move system and radial move system to the headstock of the CW61200. With the use of differential control, could make the cutter which installed on the disc could moved along radial direction. The refit widened the range of the processing of equipment, and solved the problem in manufacture.

关 键 词：钢管 卧式车床 差动控制 径向进给 

分 类 号：TG51[金属学及工艺—金属切削加工及机床]