卷边机的创新设计  

Innovative design of the scrap baller

作　　者：李智学[1] 崇育红[1] 张康武[1] 吴永杰[1] 

机构地区：[1]中国重型机械研究院,陕西西安710032

出　　处：《重型机械》2009年第5期44-45,49,共3页Heavy Machinery

摘　　要：卷边机作为板带生产车间剪切线的重要设备,其工作的稳定性、可靠性直接影响整条机组的辅助作业时间,进而影响整条机组的工作效率。本文在分析国内外卷边机存在问题的基础上,对其结构做了改进设计,增加了锥形回转圆盘,出口侧增加了护板,压辊采用液压控制。改进后的卷边机结构更加合理,工作的可靠性大幅提高,并已成功应用于武钢、鞍钢、梅钢等钢厂。Scrap baler is a key equipment in the workshop for producing steel band.Its stability and reliability directly influence the assistant time of the whole line,and then influence the efficiency of the line.Based on the analysis of the problems existing in the scrap baller in and outside China,the structural design of the scrap baller has been improved.Protective board was added at the outlet,and the hydraulic system was adopted to control the press roll.The improved scrap baller has a more reasonable and reliable structure,and has been applied in many large steel and iron companies such as Wuhan Iron Steel（group） Co.,Ltd.,Anshan Iron Steel（group） Co.,Ltd.,and Meishan Iron Steel（group） Co.,Ltd..

关 键 词：卷边机 锥形圆盘 护板 

分 类 号：TG333.4[金属学及工艺—金属压力加工]