检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:梁彩华[1] 张小松[1] 蒋赟昱[1] 李秀伟[1]
出 处:《东南大学学报(自然科学版)》2009年第5期973-977,共5页Journal of Southeast University:Natural Science Edition
基 金:国家自然科学基金资助项目(50676018);"十一五"国家科技支撑计划资助项目(2008BAJ12B02)
摘 要:针对现有空调系统空气处理方法存在的不足,提出一种热湿分段的空调系统空气处理方法.分析了热湿分段处理方法的原理和过程,通过建立热湿分段处理方法的节能数学模型,研究并得出了表冷器结构、空调回风状态对热湿分段处理方法节能效果的影响规律.结果表明:相对于常规空气处理方法,热湿分段处理方法在表冷器设计换热温差7℃、出风温度为16℃时,冷水机组COP提高达9.14%以上;在回风干球温度为25℃、湿球温度为21℃时,冷水机组COP提高达8%以上.A novel air handling method, the heat-humidity segment handling method, is proposed for overcoming the shortcomings of the present air handling method in air-condition system. The principle and process of this method are analyzed, and its investigation model for energy-saving is developed as well. The influence of cooler configuration and return-air state on the energy-saving effects is given. Applying this new method, the results show that compared to present method, the COP ( coefficient of performance) can be enhanced by more than 9. 14% when the set cooler tem- perature difference is 7 ℃ and the outlet air temperature is 16 ℃ ; the COP can be enhanced by more than 8% when the dry bulb temperature and wet bulb temperature is 25 ℃ and 21 ℃ respectively.
分 类 号:TU831.5[建筑科学—供热、供燃气、通风及空调工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222