泵体的优化设计与试验研究  

Optimization and Experimental Study on Pump Body

作　　者：何景润 孙晋明[2] 周生刚 

机构地区：[1]中煤国际重庆设计研究院,重庆400016 [2]中国矿业大学机电学院,江苏徐州221116 [3]徐州五洋科技有限公司,江苏徐州221116

出　　处：《煤矿机械》2009年第11期39-40,共2页Coal Mine Machinery

摘　　要：针对泵体壁厚过大这一问题,采用有限元分析软件ANSYS对其进行了优化,并通过试验对优化结果进行了验证。结果表明优化结果不仅减小了壁厚,而且能够满足使用要求。从而验证采用ANSYS进行优化设计的可行性,为水泵泵体的设计提供了理论依据。In view of wall thickness of the pump body is too large, the wall thickness is optimized by using finite element analysis software ANSYS, and the analysis results are verified experimentally. The results show that the optimization results not only reduce the wall thickness, but also meet the application requiremnts. Thus it proves the feasibility of optimization by using ANSYS and provides a theoretical basis for the design of the pump body.

关 键 词：ANSYS 泵体 优化 试验研究 

分 类 号：TH31[机械工程—机械制造及自动化]