Z向增强平纹编织C/SiC复合材料层间剪切强度(英文)  

Interlaminar Shear Strength of Z Direction Reinforced Plain-woven C/SiC Composite

作　　者：刘韡[1,2] 矫桂琼[1] 

机构地区：[1]西北工业大学力学与土木建筑学院,陕西西安710072 [2]西安建筑科技大学理学院,陕西西安710055

出　　处：《材料科学与工程学报》2009年第5期664-667,共4页Journal of Materials Science and Engineering

基　　金：Supported by Specialized Research Fund for the Doctoral Program of Higher Education of China(20030699040).

摘　　要：碳纤维平纹编织物和穿透厚度的碳纤维Z-pins制作的预成型体,通过化学气相渗透工艺制备了Z-pins增强平纹编织C/SiC复合材料。采用双缺口剪切压缩试验测定了Z-pins增强平纹编织C/SiC复合材料的层间剪切强度,通过断口的电镜照片分析了层间剪切的破坏机理。研究了Z-pins个数对层间剪切强度的影响。结果表明:与未增强陶瓷基复合材料相比较,当Z-pins个数达到一定数量时,Z-pins插入能够提高层间剪切强度,层间剪切强度随Z-pins个数的增多而增加。Z-pins插入改变了陶瓷基复合材料的层间破坏机理,使层间织物与基体的脱离变为Z-pins的剪切破坏和层间织物与基体脱离的双重破坏机制。A preform consisting of plain-woven carbon fabric and Z-pins made of through-thickness carbon fiber bundles was prepared and then the Z-pin reinforced plain-woven C/SiC composite was fabricated by a chemical vapor infiltration.Double-notched shear compression tests and scanning electron microscopy were used on Z-pin reinforced plain-woven C/SiC ceramic matrix composite to measure interlaminar shear strength and to analyze fracture mechanism of the interlaminar shear,respectively.Effect of the number of Z-pins on interlaminar shear strength was studied.The results show that the insertion of Z-pins improves interlaminar shear strength when the number of Z-pins reached a certain quantity comparing with the ceramic matrix composites without Z-pins,and interlaminar shear strength increases as the number of Z-pins increases.Z-pins change the interlaminar fracture mechanism of the ceramic matrix composites into a double fracture mechanism of Z-pin shear fracture and debonding of fabric and matrix of interlaminar.

关 键 词：陶瓷基复合材料 层间剪切强度 双缺口剪切试验 

分 类 号：TB321[一般工业技术—材料科学与工程]