检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]广东工业大学土木工程系,广州510006 [2]华南理工大学土木工程系,广州510641
出 处:《工业建筑》2009年第10期126-130,71,共6页Industrial Construction
基 金:科技部重大基础研究前期研究专项基金资助项目(2004CCA03300);广东工业大学博士基金资助项目(083061);广东省自然科学基金资助项目(9451009001002744)
摘 要:对7个带约束拉杆和2个不设约束拉杆矩形钢管混凝土短柱进行偏心受压试验研究,主要研究偏心率、约束拉杆水平间距对矩形钢管混凝土短柱偏压性能的影响。试验研究结果表明,在偏心压力作用下,约束拉杆的设置有助于提高矩形钢管混凝土短柱的延性,延迟钢管的局部屈曲。带约束拉杆矩形钢管混凝土柱的偏压承载力随偏心率的增大而减小。在相同偏心率下,试件延性随拉杆水平间距减小而增大。The experiments of seven rectangular CFT stub columns with binding bars and two without binding bars eccentrically loaded in compression were carried out with the main parameters such as eccentricity ratio and binding bar horizontal spacing. Experimental results indicate that binding bars increase the ductility of rectangular columns under eccentric load and delay the local buckling of steel tubes. The ultimate capacity decreases with load eccentricity ratios increasing. When load eccentricity ratios are the same, the ductility increases with binding bar horizontal spacing decreasing.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.18.107.160