基于Archard理论的挤压次数对模具磨损量的影响分析  

Analysis of influence of extrusion times on total die wear based on Archard theory

作　　者：林高用[1] 冯迪[1] 郑小燕[1] 杨伟[1] 孙利平[1] 

机构地区：[1]中南大学材料科学与工程学院有色金属材料科学与工程教育部重点实验室,湖南长沙410083

出　　处：《中南大学学报（自然科学版）》2009年第5期1245-1251,共7页Journal of Central South University:Science and Technology

基　　金：国家高技术研究发展计划项目(2007AA03Z517)

摘　　要：针对前次挤压对后次挤压的模具磨损有着显著影响,模具的总磨损量并不与单次磨损量呈简单的线性关系,将考虑温度影响的Archard磨损计算修正模型与有限元数值模拟分析方法相结合,预测铝合金挤压过程中模具表面磨损最严重的部位,建立该部位磨损量与挤压次数之间的确切关系,并由此提出一种考虑挤压次数影响的总磨损量计算公式。Based on the fact that under discontinuous extrusion condition,former passes often have great effect on the next ones,so that the relationship between die wear of single process and total wear is not linear,the position with the largest amount of wear on the die surface was predicted,and the relationship between the extrusion times and the total die wear was estimated by combining modified Archard model which considered the influence of temperature on the die wear behaviors and finite element method（FEM）technology.As a result,an equation for evaluating the total die wear which considers the effects of extrusion times was established.

关 键 词：挤压 模具磨损 Archard理论 有限元 

分 类 号：TG375.41[金属学及工艺—金属压力加工]