检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈忠海[1] 陈家庆[1] 焦向东[1] 周灿丰[1]
机构地区:[1]北京石油化工学院海洋工程连接技术研究中心,北京102617
出 处:《焊接学报》2009年第11期37-40,共4页Transactions of The China Welding Institution
基 金:国家自然科学基金资助项目(50675022);国家863高技术研究发展计划资助项目(2006AA09Z329);北京市自然科学基金资助项目(3073017)
摘 要:在国内首台摩擦叠焊设备上实现了2024铝合金/2024铝合金摩擦液柱成形(FHPP)连接,金属棒消耗段的直径为14 mm,预钻孔深为25 mm,孔径为16 mm,主要研究了转速和保护气体对FHPP成形质量的影响,通过金相显微镜、显微硬度仪等测试手段分析了试样的微观组织性能.结果表明,转速过低导致母材和金属棒无法接合甚至出现马达不能正常工作现象,采用转速为5 000 r/min,进给速度为0.5 mm/s的组合,可得到较好的焊缝;施加保护气体能更进一步改善FHPP的成形质量,接合线较未加保护气体时明显细化,金属棒上端材料和母材达到了良好接合.The cylindrical coupling of 2024 Aluminum alloy was welded by friction hydro pillar processing(FHPP) in the first domestic friction stitch welding machine.The diameter of the consumed metal stud is 14 mm,the depth and diameter of the pre-drilled hole are 25 mm and 16 mm respectively.The effects of rotational speed and shielding gas on the FHPP quality were mainly studied,and the microstructure and its properties of the sample were analyzed by means of some measuring apparatus such as optical microscope and microhardness tester etc.The results indicate that the low rotation can form the insufficient bonding,even result in the cease of the weld head motor during the welding.The quality of welded joint is better when the rotational speed is 5 000 r/min and the feeding rate is 0.5 mm/s.The shielding gas can improve the quality of FHPP with thinner fusion line,and the upper part of the metal stud is bonded to the base metal very well.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15