CODOG监控系统电路板自动测试技术研究  

Automatic Testing Technique for PCB of CODOG Monitoring and Control System

作　　者：肖新斌[1] 刘永葆[2,3] 高建华[3] 

机构地区：[1]中国人民解放军91458部队修船处 [2]华中科技大学能源与动力学院 [3]海军工程大学船舶与动力学院

出　　处：《中国舰船研究》2009年第5期45-48,共4页Chinese Journal of Ship Research

基　　金：国防预研基金资助(40101020103)

摘　　要：电路板自动测试技术对于舰用动力装置监控系统的故障检测与维修至关重要。以CODOG动力装置监控系统使用广泛、故障率较高的电路板RA1-01继电器输出板为例,选取BDS—9210柜式VXI自动测试设备作为测试平台,介绍RA1-01的测试程序集(TPS)的开发过程。测试结果表明:TPS故障检测率为95%,故障隔离率为80%(模糊度为4)。PCB （Printed Circuit Board） automatic test is very important to fault diagnosis and maintenance of monitoring and control system of warship power plant. A CODOG power plant monitoring and control system was analyzed. Automatic test equipment BDS-9210 was selected as the test platform. The test program set （TPS） of the relay output board RA1-01 which has been brought into wide use and often breaks down in monitoring and control system was developed. The test results show that the rate of fault detection is 95%, and the fault isolation is 80% （fuzzy degree 4）.

关 键 词：联合动力装置 自动化监控系统 继电器 电路板自动测试 测试程序集 舰船技术保障 

分 类 号：U664.82[交通运输工程—船舶及航道工程]