圆盘剪剪切平行度问题的分析与对策  

Analysis and Treatment on the Problem of Parallelism in Plate Cutting with Disc Shears

作　　者：孙玮[1] 杨公本[1] 李延芝[1] 倪立森[1] 宋长荣[1] 

机构地区：[1]济南钢铁股份有限公司中板厂,山东济南250101

出　　处：《山东冶金》2009年第5期102-103,共2页Shandong Metallurgy

摘　　要：针对圆盘剪剪切镰刀弯问题,分析认为影响剪切平行度的因素有:夹送辊速度差、剪刃使用状态、圆盘与碎边同步性、原始板型及操作控制等。通过建立剪刃同步更换机制,优化调整夹送辊及垂直与水平刀缝,提高圆盘剪自动定位精度等,钢板镰刀弯控制水平由0.8～1mm/m提高到0～0.2mm/m。Aiming at the camber caused during the cutting of steel plates with disc shears, analysis considered that the following factors have influences on the parallelism of cutting： different speeds of pressing transporting rofls, the condition of the cutting edges, the simultaneousness between the disc and the plate edge to be cut, the original shape of the plate and operation control, etc. Some optimization measures were adopted, such as establishing a mechanism of simultaneous replacement of cutting edges, optimizing and adjusting the pressing transporting rolls, letting the edges of the cutting machine be upright to the plate surface when there was transformation of plate shape, making compensation for the distance between the two pressing transporting rolls, improving the preciseness of the disc shears positioning. The cambers were improved from 0.8 - 1 mm/m to 0 - 0.2 mm/m.

关 键 词：镰刀弯 圆盘剪 夹送辊 垂直与水平刀缝 平行度控制 

分 类 号：TG335.52[金属学及工艺—金属压力加工]