利用不稳定压力数据建立碳酸盐岩储集层模型(英文)  

Construction of a carbonate reservoir model using transient pressure data

作　　者：Seyed Sadegh Taheri Rudsari Mohammad Bagher Ghanizadeh Manuchehr Haghighi 

机构地区：[1]伊朗石油工业研究院 [2]德黑兰能源咨询公司(TEC) [3]德黑兰大学

出　　处：《石油勘探与开发》2009年第6期762-767,共6页Petroleum Exploration and Development

摘　　要：地质模型通常是根据地质信息,利用地球物理和岩石物理资料来建立。为了建立准确的碳酸盐岩油藏(伊朗海上油田)模型,不仅利用了地震和测井数据,也结合了该油田现有99井次的试井数据。在试井解释过程中观察到了许多特征,如封闭断层、水层、裂缝和分层系统,其中某些特征只能利用压力瞬态数据来识别,如地震数据中观察不到的一条封闭断层在试井曲线上则可识别。除了识别构造特征外,试井解释得到的渗透率数据也可用于绘制渗透率等值线图,而不再采用岩心分析得到的渗透率数据。试井得到的渗透率是泄油区域的有效渗透率,而岩心分析得到的渗透率并不能代表非均质油藏的渗透性。利用非稳态压力分析结果建立油藏模型,可以提高碳酸盐岩油藏建模的准确性。A geological model is usually constructed using geophysical and petrophysical data by virtue of geological information. In this work, in order to achieve accurate model we built a carbonate reservoir model not only by seismic and well log data but also by the integration of 99 well test data available for this field. Many features such as sealing faults, aquifer, fracturing and layering systems were observed during the well test interpretation. Some of the above features were identified only by pressure transient data such as one sealing fault which was not observed in the seismic data. In addition to the identification of structural features, permeability data from well test were also used for the construction of isopermeability map instead of depending on permeability data from core analysis. This is very significant assignment in a heterogeneous carbonate reservoir and when a single porosity model is used. Permeability obtained from well test is the effective permeability in the drainage area of each well while permeability from core analysis does not represent the property of a heterogeneous reservoir. This work proves that using transient pressure analysis results in construction of reservoir model can improve the accuracy of carbonate reservoirs models.

关 键 词：碳酸盐岩储集层 非稳态压力 试井 储集层模型 

分 类 号：TE353[石油与天然气工程—油气田开发工程]