SWRCH15A冷镦钢形变特征与组织结构研究  

Deformation Characteristics and Microstructures of SWRCH15A Cold-heading Steel

作　　者：李璐君[1] 朱志雄[1] 曹志强[2] 田树生[2] 易丹青[1] 张鸿[1] 

机构地区：[1]中南大学材料科学与工程学院,长沙410083 [2]湖南华菱湘潭钢铁有限公司,湘潭411101

出　　处：《材料导报（纳米与新材料专辑）》2009年第2期555-558,共4页

基　　金：高校博士点专项科研基金(20070533119);中国博士后科学基金(20080431030);湖南省科技计划博士后科研资助专项(2008RS4015)

摘　　要：对湘潭钢铁有限公司生产的低碳冷镦钢SWRCH15A进行了1/3冷镦实验,利用光学显微镜、扫描电子显微镜、X射线衍射分析和透射电子显微镜分别对冷镦前后试样的横向、纵向截面进行了形变特征与微观组织的研究。结果表明,试样经1/3冷镦变形后呈鼓形,金相与扫描电镜观察发现组织呈明显的3个不均匀变形区域。冷镦变形后铁素体形成尺寸较小的纤维状亚晶结构,呈现<111>纤维织构和弱的<100>纤维织构。冷镦变形后,珠光体片层组织减少,片层厚度明显缩小。冷镦变形后组织中发现有一种新相形成。In this paper, the low carbon cold-heading steels SWRCH15A from Xiangtan Iron and Steel Company Limited are examined by 1/3 cold heading test. The microstructures and deformation characterizations of the transverse cross-section and longitudinal section before and after cold heading are examined by the optical microscope, scanning electron microscope,XRD diffractometer and transmission electron microscope. The results show that the sample is drumike after the cold heading, and is distinguished into three nonuniformly deformed regions by optical and SEM analysis. Ferrite becomes small fiber structure after the cold heading deformation and exhibits 〈111〉 fiber texture and weak 〈100〉 fiber texture. After the deformation, the amount of pearlite structures is decreased and the lamellar distance of the pearlite becomes obviously smaller. A new unknown phase is detected to be formed after the cold heading.

关 键 词：冷镦钢 冷镦变形 显微组织 

分 类 号：TG142[一般工业技术—材料科学与工程] P551[金属学及工艺—金属材料]