毒性分析微生物传感器电极固定方法研究  

Immobilization Methods of Electrodes for Toxicity Microbial Biosensor

作　　者：王学江[1] 张峰华[1] 丁钰力[1] 赵建夫[1] 

机构地区：[1]同济大学污染控制与资源化研究国家重点实验室,上海200092

出　　处：《同济大学学报（自然科学版）》2009年第11期1497-1501,共5页Journal of Tongji University:Natural Science

基　　金：国家自然科学基金资助项目(20707014);国家"八六三"高技术研究发展计划资助项目(2009AA06A417);上海市基础研究重点资助项目(08JC1418900)

摘　　要：采用戊二醛-牛血清蛋白(GA-BSA)交联法和聚碳酸酯膜直接固定法制备了大肠杆菌(E.coli)微生物电极,探讨了基于E.coli电极的微生物传感器在重金属和毒性有机物急性毒性分析中的应用性能.试验结果表明,采用戊二醛-牛血清蛋白交联固定法制备的E.coli微生物电极的灵敏性较差,难以满足毒性分析需要.聚碳酸酯膜直接固定法制备的E.coli微生物电极具有良好的灵敏性和稳定性,在冰箱4℃保存2个月,仍能很好地满足毒性分析需要,该固定方法具有制备简单和可实现电极的重复利用等特点,大幅降低了微生物传感器的毒性分析成本.The bovine serum albumin-glutaraldehyde cross- linking process and polycarbonate membrane immobilization process were used to prepare E. coli microbial electrodes for toxicity microbial biosensor, and their performance for heavy metals and toxic organic compounds toxicity determination was studied. The results show that the sensitivity of the E. coli microbial electrodes prepared by GA - BSA immobilization method is very poor, and is not suitable for toxicity assessment. E. coli microbial electrode prepared by polycarbonate membrane immobilization process exhibits high sensitivity and good stability for toxicity determination, and is suitable for the toxicity assessment even after 2 months＇ storage at 4 ℃. The polycarbonate membrane immobilization process is very simple, and the reusing of electrodes can be realized and thus the cost of toxicity determination with microbial biosensor reduces.

关 键 词：微生物传感器 毒性 重金属 有机物 

分 类 号：X853[环境科学与工程—环境工程] X132