考虑大变形影响的大型脱硝反应器结构数值分析  

Numerical analysis on the structure of selective catalytic reduction reactors in a heat-engine plant based on large deformation

作　　者：宋波[1] 李春霞[1] 孙北东[1] 王利[2] 徐明磊[2] 

机构地区：[1]北京科技大学土木与环境工程学院,北京100083 [2]北京国电龙源环保工程有限公司,北京100052

出　　处：《北京科技大学学报》2009年第11期1373-1379,共7页Journal of University of Science and Technology Beijing

基　　金："十一五"国家科技支撑计划资助项目(No.2006BAJ13B04)

摘　　要：针对我国目前对于大型脱硝反应器的设计无规范可循的状况,利用数值方法分析脱硝反应器结构,得到反应器整体变形与应力分布情况,以及反应器结构设计时应注意的构件与位置.通过对比大、小变形时加劲板的应力与变形发现,考虑大变形影响后其应力值水平有所缓和,分布较均匀.研究表明,在保证安全和满足反应器使用功能前提下,反应器的合理化设计尚有一定的空间.At present there is no design standard in designing large steel SCR （selective catalytic reduction） reactors. According to numerical analysis on the structure of a steel SCR reactor, the stress and deformation as well as weak position of whole construction are obtained. The results derived from geometric linear analysis and geometric nonlinear analysis are compared. According to the results, the data based on geometric linear analysis are conservative, and the stress distribution is more homogeneous when large deformation is considered. It turns out that the rational design of the reactor structure has a surplus to meet the needs of safety and the use function of the reactor.

关 键 词：选择性催化还原反应 反应器 钢结构 结构分析 

分 类 号：TU271.1[建筑科学—建筑设计及理论]