兼顾低速重载和高速轻载电主轴的可控预紧方法研究  

Research on a Controllable Preload Method of High Frequency Spindles with Characteristics of Low-Speed Heavy and High-Speed Light Loads

作　　者：纪宗辉[1] 吕浪[1] 李芳芳[1] 熊万里[1] 

机构地区：[1]湖南大学国家高效磨削工程技术研究中心,湖南长沙410082

出　　处：《制造技术与机床》2009年第12期132-136,共5页Manufacturing Technology & Machine Tool

基　　金：国家数控机床重大专项资助项目(No:2009ZX04010-023)

摘　　要：为克服电主轴采用传统定压预紧方式低速时预紧力偏小和高速时预紧力偏大的弊端,提出了一种电主轴预紧力可控的预紧方式,对比研究了电主轴在这两种预紧方式下的动力学性能。结果表明,可控预紧电主轴能同时满足低速重切削和高速轻切削的加工要求。In order to overcome the weakness of a traditional constant preload method which leads to the preload being too small at low speeds and too big at high speeds, a controllable preload method of motorized spindles is proposed. The dynamic performance of motorized spindles with the two preload methods mentioned above is compared. It is shown that the motorized spindle with a controllable preload method can satisfy the machining requirement of heavy cutting at low speeds and light cutting at high speeds well.

关 键 词：电主轴 定压预紧 可控预紧 动力学性能 

分 类 号：TH131.3[机械工程—机械制造及自动化] TP206.3[自动化与计算机技术—检测技术与自动化装置]