水平井抽油杆柱力学模型的建立与分析  

ESTABLISHMENT AND ANALYSIS OF SUCKER RODS MECHANICAL MODEL IN HORIZONTAL WELL

作　　者：王旱祥[1] 马邦勇[1] 刘传礼[2] 

机构地区：[1]中国石油大学(华东)机电工程学院,东营257061 [2]胜利油田井下作业公司特车大队,东营257077

出　　处：《机械强度》2009年第6期952-956,共5页Journal of Mechanical Strength

基　　金：国家科技重大专项大型油气田及煤层气开发(2008ZX05038-004)中的部分研究内容~~

摘　　要：首先分析水平井筒里抽油杆柱的运动状态,考虑柱塞与悬点运动的不一致性,找出杆柱受力最大和最小的位置时刻,根据井筒中抽油杆柱的空间几何关系,考虑抽油杆的约束条件和井斜角、方位角的变化等边界条件后,建立抽油杆柱的力学模型,并对模型进行相关分析,对杆柱的优化设计和优化配套防偏磨的工艺具有一定的指导意义。The movement of sucker rods in horizontal well is investigated. Considering the discordance of the movement of plunger and suspension center, the position where the load on sucker rod is maximum and minimum is found. Considering the boundary conditions of well deviation angle change, azimuth change and the constraints of rod strings, the mechanical model of sucker rod was made based on the spatial mechanical model of rod string. Verified by an example calculation, the curve of axial load of sucker rod and depth of oil well is nonlinear, this is consistent with reality. Basing on the mechanical model, the design of rods and mating technology for controlling eccentric wear can be optimized.

关 键 词：水平井 抽油杆柱 偏磨 力学模型 

分 类 号：TE355.6[石油与天然气工程—油气田开发工程] TE933.2