丁苯橡胶/纳米硅铝管复合材料的制备工艺与性能  

Preparing Technology and Properties of SBR/Silicoalumina Nanotube Composites

作　　者：宋阳[1] 叶欣[1] 张立群[1,2] 程志林 

机构地区：[1]北京化工大学教育部纳米材料重点实验室,北京100029 [2]北京化工大学北京市新型高分子材料制备与加工重点实验室,北京100029 [3]天津静和科技有限公司,天津塘沽300451

出　　处：《特种橡胶制品》2009年第6期1-5,18,共6页Special Purpose Rubber Products

摘　　要：分别采用直接共混法、填料预处理法、原位改性分散法、乳液法制备了丁苯橡胶/纳米硅铝管(SBR/SANT)复合材料,并对其结构和性能进行了表征。结果表明:采用原位改性分散的方法能够有效改善填料与橡胶间的界面强度,制备得到力学性能优异的SBR/SANT复合材料。采用乳液法制得复合材料的填料分散较好,扫描电子显微镜观察到SANT基本以单管分散,其导热性能明显优于干法混合。随着纳米硅铝管用量增大,SBR/SANT复合材料的硬度、定伸应力、拉伸强度、撕裂强度和导热系数提高,拉断伸长率下降。The ing method, filler ing method respec SBR/silicoalumina nanotubes（SANTs） composites were prepared by directly blend- pre-treatment method, in-situ modification dispersion method and emulsion blendtively, and their structure and properties were characterized. The results showed that the in-situ modification dispersion method could effectively improve the interface strength between the filler and rubber so as to get SBR/SANTs composite with excellent mechanical properites. The composites prepared by emulsion blending method offered better filler dispersion, for SANTs in composite were almost dispersed as single tubes showed by SEM. With the increasing amount of SANT, the hardness,modulus at 300~, tensile strength , tear strength and coefficient of thermal conductivity increased, and elongation at break decreased.

关 键 词：纳米硅铝管 丁苯橡胶 加工方法 

分 类 号：TB332[一般工业技术—材料科学与工程]