用锥形量热仪研究PS／MH复合材料燃烧性能  

Study on Fire Performance of PS/MH Composites by Cone Calorimeter

作　　者：刘继纯[1] 王伟 李晴媛[1] 付梦月[1] 

机构地区：[1]河南科技大学化工与制药学院,高分子科学与纳米技术重点实验室,河南洛阳471003 [2]上海联合气雾制品灌装有限公司,上海201906

出　　处：《现代塑料加工应用》2009年第6期41-44,共4页Modern Plastics Processing and Applications

基　　金：河南科技大学人才科研基金(项目号09001147);2007年度校基金(项目号2007ZY021)资助

摘　　要：将聚苯乙烯(PS)树脂与改性后的氢氧化镁(MH)直接进行熔融复合制备PS/MH复合材料,采用锥形量热仪对复合材料的燃烧行为进行了研究。结果表明,加入20份MH可使PS的峰值热释放速率(HRR_(peak))、峰值质量损失速率(MLR_(peak))和峰值生烟速率(SPR_(peak))分别降低57.9%,40.9%和52.1%,引入MH后复合材料的热释放速率(HRR)、质量损失速率(MLR)和生烟速率(SPR)等燃烧性能参数均显著降低,材料的燃烧时间延长,分解速率减小。随着MH含量增加,复合材料的燃烧性能参数均明显降低,表现出良好的阻燃性和抑烟性。The composites of PS/MH were prepared by direct melt blending of PS resin and modified MH. Cone calorimeter was employed to investigate the fire performance of the composites. It is demonstrated that the peak heat release rate（HRRpeak）, peak mass loss rate （MLRpeak）and peak smoke production rate （SPRpeak）of the composites can be reduced by 57. 9%, 40.9% and 52.1%, respectively , with the addition of 20 phr MH. The introduction of MH can decrease the heat release rate （HRR）, the mass loss rate （MLR） and the smoke production rate （SPR） of PS/MH dramatically, accompanied with much longer combustion time and lesser degradation rate. With the increase of MH content, all the fire parameters of the composites are reduced noticeably, exhibiting excellent fire retarding and smoke suppressing properties.

关 键 词：聚苯乙烯 氢氧化镁 燃烧行为 锥形量热仪 

分 类 号：TQ325.2[化学工程—合成树脂塑料工业]