基于4×4 mesh光互连网络的EOPCB设计  

Design of 4×4 mesh network based-optical interconnect EOPCB

在线阅读下载全文

作  者:李斌[1,2] 罗风光[1,2] 余志华 周伟林 

机构地区:[1]华中科技大学武汉光电国家实验室(筹) [2]光电子科学与工程学院,湖北武汉430074

出  处:《华中科技大学学报(自然科学版)》2009年第12期37-40,共4页Journal of Huazhong University of Science and Technology(Natural Science Edition)

基  金:国家自然科学基金资助项目(60677023);国家高技术研究发展计划资助项目(2006AA01Z240)

摘  要:设计了一种新的基于光波导的4×4mesh网络光互连系统,系统采用带光波导光互连层的多层高速光电混合印刷电路板——EOPCB的设计方案实现,系统中芯片间光波导互连mesh网络具有通过光互连方式实现芯片间mesh网络的上移、下移、左移、右移功能.EOPCB板上的每个处理单元PE芯片均同时带有VC-SEL激光器光发射列阵和PIN光接收阵列,通过EOPCB板上的光波导互连层进行芯片间的双向并行高速通信.芯片间单通道数据传输速率最高可达3.125Gbit/s,双向并行通道数为4,芯片间的双向并行传输速率可达12.5Gbit/s.A 4× 4 mesh network interconnect system with light waveguide is proposed. In this system, an additional optical layer with light waveguide structure is used in conventional print circuit board (PCB) to construct electric optical print circuit board (EOPCB). The direction of optical interconnect link for every a chip can be oriented. Vertical cavity surface emitting laser (VCSEL) array is used as optical transmitter array; positive-intrinsic-negative photodiode array is used as an optical receiver array. The optical signals from a processor element chip can be transmitted to element chips of another processor on the same board through light waveguide inter-connection in the board. The data rate of each optical channel is 3. 125 Gbit/s and the number of full parallel channel is 4, and 12.5 Gbit/s parallel optical interconnect link for every direction of a chip can be implemented.

关 键 词:光互连 光波导 MESH网络 并行处理 光电混合印刷电路板 发射阵列 接收阵列 

分 类 号:TN202[电子电信—物理电子学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象