氨浸出含锌烟尘制取活性氧化锌  

Preparation of Activated Zinc Oxide from Zinc Dust by Ammonia Leaching Process

作　　者：佟志芳[1] 杨光华[1] 李红超[1] 杨龙[1] 简云[1] 

机构地区：[1]江西理工大学材料与化学工程学院,江西赣州341000

出　　处：《化工环保》2009年第6期534-537,共4页Environmental Protection of Chemical Industry

摘　　要：采用氨浸出法处理含锌烟尘,浸出液在微波-超声波联合作用下蒸氨得碱式碳酸锌沉淀,再经煅烧制得活性氧化锌。实验结果表明:在总氨浓度为9.0 mol/L、浸出温度为40℃、浸出液初始pH为11.0～11.5、搅拌转速为400 r/min、浸出剂体积与含锌烟尘质量比为4、浸出时间为60 min的浸出条件下,锌的浸出率为83.3%。浸出液经过两段净化除杂后,在超声波功率50 W、微波辐射(微波功率随温度的设定而自动变化)的联合作用下,使溶液体系恒温90℃,进行蒸氨,沉淀得到前驱体碱式碳酸锌,经煅烧,得到平均直径为0.4μm、晶型为六方晶系、片状的活性氧化锌。Activated zinc oxide was prepared from zinc dust via ammonia leaching, ammonia distillation with microwave-ultrasonic wave, and calcination. When the total ammonia concentration is 9.0 mol/L, the leaching temperature is 40℃, the initial pH of the leaching solution is 11.0 - 11.5, the stirring speed is 400 r/min, the ratio of leaching agent volume to zinc dust mass is 4 and the leaching time is 60 min, the leaching efficiency is 83. 3%. Basic zinc carbonate, which is the precursor of activated zinc oxide, is precipitated from the leaching solution by two-stage purification and ammonia distillation at the constant temperature of 90℃ kept by ultrasonic wave and microwave, and than activated zinc oxide is obtained by calcination, which is a kind of hexagonal sheet crystal with 0.4μm of average diameter.

关 键 词：氨 含锌烟尘 微波 超声波 氧化锌 

分 类 号：X701.3[环境科学与工程—环境工程]