检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈林[1,2] 刘立峰[1,2] 李珍[1,2] 杜城[1,2] 林少亮[1,2]
机构地区:[1]教育部纳米矿物材料及应用工程研究中心中国地质大学(湖北武汉),湖北武汉430074 [2]中国地质大学(武汉)材料科学与化学工程学院,湖北武汉430074
出 处:《武汉工程大学学报》2009年第12期59-62,共4页Journal of Wuhan Institute of Technology
摘 要:采用柠檬酸盐法制备出Bi0.5(Na0.95K0.05)0.5TiO3(BNKT5)无铅压电陶瓷,通过XRD、SEM等测试手段,研究了BNKT5粉体合成温度及陶瓷埋烧氛围对BNKT5陶瓷性能与结构的影响.结果表明,烧结温度为1 130℃时,利用750℃合成BNKT5粉体,在Al2O3粉中埋烧制备的BNKT5陶瓷的晶粒结晶度高,呈紧密堆积,大小分布均匀,具有较高的压电常数、机械品质因数和较低的介电损耗.The lead-free Bi0.5(Na0.95K0.05)0.5TiO3(BNKT5) piezoelectric ceramics were prepared by citrate method. Their structure and properties were determined by using X-ray diffraction and scanning electron microscope, respectively. The effects of calcining temperature for BNKT5 powder and atmosphere of burying sintering for BNKT5 ceramics on the structure and properties have been investigated. This study indicated that the calcining temperature 750 ℃ for the BNKT5 powder and 1 130 ℃ in Al2O3 for the ceramics are needed for the BNKT5 ceramics, which possesses packing density of grain, uniform grain in size, good crystallinity and hence higher piezoelectric constant, mechanical quality factor and lower dielectric loss in this work.
分 类 号:TM282[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200