电解法预处理高质量浓度难降解染料废水  

Pretreatment of high-strength unbiodegradable dye wastewater with electrolysis processes

作　　者：祁佩时[1] 陈战利[2] 张焕鑫[1] 刘云芝[1] 

机构地区：[1]哈尔滨工业大学城市水资源与水环境国家重点实验室,哈尔滨150090 [2]南昌大学建筑工程学院,南昌330031

出　　处：《哈尔滨工业大学学报》2009年第10期47-51,共5页Journal of Harbin Institute of Technology

基　　金：国家高技术研究发展计划资助项目(863-2004CB418505)

摘　　要：为实现高质量浓度难降解染料废水的经济、高效处理,采用电解法进行预处理,考察电絮凝气浮、电解间接氧化和电解Fenton3种方法在废水有机物去除和可生化性改善等方面的性能.结果表明:电解Fenton法在电压15V、pH=4、反应时间2h的条件下,COD去除率可达48.1%,m(BOD5)/m(COD)值由原废水的0.07提高到0.42,为后续生物处理创造了条件;电解Fenton法的性能明显优于电絮凝气浮法和电解间接氧化法.Three kinds of electrochemical methods, electro-flocculation, indirect electro-oxidation and electro- Fenton were investigated as pre-treatment processes for efficient and economical treatment of non-biodegradable organic fresh dye wastewater with high strength. The efficiency of each method was evaluated according to the reduction levels of COD, as well as the biodegradability improvement. The results indicated that, under the optimal conditions that voltage was 15 V, pH was 4 and reaction time was 2 h, the removal rate of COD reached 48. 1% and the ratio of BODs/COD was increased from 0.07 to 0.42 in the electro-Fenton process, which made the effluents convenient for the consequent bio-treatment. Meantime, the electro-Fenton process was more efficient than either electro-floeculation process or indirect electro-oxidation process.

关 键 词：电解法 染料废水 预处理 可生化性 

分 类 号：X703[环境科学与工程—环境工程]